How To Make DTF Transfers?

How To Make DTF Transfers?

Since DTF transfer has been popular lately, it is easy to find a lot of information about it. However, as with any project, there are some points that need to be considered in order for printing projects to be successful. Some tips will affect the success of the project and provide more beautiful results. Read on to find out the tips that will change the rules of this printing method.

What Are the Most Important Tools for Making DTF Transfers?

You need some basic tools to make DTF transfers. But these tools are for businesses. If you are going to apply it at home, the transfer paper prepared for you by the printing company will be enough. The tools required for DTF transfers to be applied are as follows:

  • DTF printer
  • DTF movie
  • Curing machine
  • Heat press
  • Graphic design software
  • Layering
  • Direct film techniques
  • Special effects

What are the Tips for Successful DTF Printing?

A successful result is very important in DTF printing. Because when it comes to the final stage of printing, it can be difficult to recover from mistakes. For this reason, there are some tips that should be done at every step. Here are the tips you need to know if you are going to try this print:

The right film: Be careful when using DTF film to avoid damages at the end of the printed design. It is important not to stain the design. You can wear gloves to avoid smudges.

Invest in high-quality ink: It is worth buying high-quality transfer ink for your DTF printer. If you buy low-quality ink, you will get flimsy results. You will also experience poor color reproduction.

Make a test print: You can make a test print before applying the entire DTF print. This way you can see in advance that your ink and film are compatible. On the other hand, you should not forget to calibrate the printer regularly for print quality.

Preheat the material: To avoid problems such as moisture and wrinkles in the design, we recommend preheating the material. This will ensure better adhesion and therefore a smooth design.

6 Steps How to Make a DTF Transfer?

Before learning the tips on how to make a DTF transfer, you need to know how to do it. Especially if you are going to try it for the first time, you should pay close attention to this process. It is important to follow each step without skipping a step in order to get successful and eye-catching print results. Below we have given information about the making of DTF transfers, which consists of 7 steps:

Step 1: In the first step, preheat your heat press and set the temperature according to the manufacturer's instructions. Although this is the first step in the design process, it is not effective if the temperature is not set appropriately. 

Step 2: After heating the heat press, apply the press by positioning it properly on the garment. Apply the press to the garment with light pressure for 3-5 seconds. However, be careful to remove moisture and wrinkles from the fabric. 

Step 3: Align the transfer well by placing the transfer on the garment. Correct alignment is important for a professional look. If it is misaligned it can give an amateur look.

Step 4: After aligning, press onto your garment with the heat press. The heat and pressing time varies according to the manufacturer's instructions. Therefore, follow the manufacturer's instructions. Be patient and take your time with this process. 

Step 5: Once you're sure the transfer is stuck, let it cool for a few minutes. Once cool, it's time to remove the transfer! If it's cool, start peeling the transfer film off slowly. 

Step 6: You can heat press it again a few more times to make it more durable. After cooling for 10-15 minutes, you can remove the film and get both durable and successful results.

Back to blog