Heat Press
1. Pressure Setting
Set the heat press to medium to firm pressure.
2. Temperature
For cotton and 50/50 blends, set the temperature to 320-350F°.
For synthetic or polyester fabrics, set the temperature to 280-300F°
3. Press
Press the transfer to fabric for 8 seconds.
4. Hot Peel
Peel your DTF Transfer Sheet while still warm in one motion.
(Cold peeling also works.)
For Enhanced Durability*
Cover the image with parchment paper after peeling the film off and press again for 5 seconds.
Iron On
1. Temperature
Set the temperature to the highest temperature setting on your iron.
(Best around 300F°.)
2. Press
Apply even pressure to all of the design with the iron and press evenly for 15-20 seconds onto the garment.
3. Hot Peel
Peel immediately while hot, in one continuous, smooth, rapid motion.
(Cold peel also works.)
